Peeled the peel-ply off the main spar. Marked locations of the nose ribs on the
spar. Trimmed the extra spar length, about 20-30mm on each end. Joined two nose
ribs to make a double nose rib. Glued and taped the nose ribs to the main spar.
Made the pushrod channels in the two center aft ribs. Glued the two aft ribs together to make a double rib as per the drawings.
Made the pushrod channels in the two center aft ribs. Glued the two aft ribs together to make a double rib as per the drawings.
