Trimmed the fiberglass at the edge of the masking tape (while the epoxy is still
green). Warming the layup with a heat gun helped to make epoxy softer and easier
to cut with a knife (less force, less damage to the plywood).
Sanded the hardened fiberglass layup to remove all bumps. Came out very decent, as good as I could expect. May not need spackling and more sanding. TBD.
Filled the trailing edges (anti-servo tab and stab) with epoxy + microlight filler.
Sanded the hardened fiberglass layup to remove all bumps. Came out very decent, as good as I could expect. May not need spackling and more sanding. TBD.
Filled the trailing edges (anti-servo tab and stab) with epoxy + microlight filler.
