Cut out the anti-servo tab skin from the top skin. Trimmed with a knife, then
sanded the overganging plywood on the trailing and leading edges. Used a small
belt sander to remove the bulk of the extraneous plywood, then a hand plane, then a
sanding block. Lots of muscle work. Same for the tips - knife trimmed, sanded
the plywood and the foam ribs, to get a square edge on both tips.
Prepared and glued the top skin onto the anti-servo tab. Used colored epoxy as a varnish, to be able to glue immediately.
Prepared and glued the top skin onto the anti-servo tab. Used colored epoxy as a varnish, to be able to glue immediately.
